FAQ's
- Will the Roca semi-recessed basins fit to any other manufacturers bathroom furniture?
- Why does water continue to flow into the pan after flushing?
- Why does the push button cistern when operated continue to flush and not close and fill up (old installation)?
- Why does the pan/cistern installed not take waste/paper away?
- Why does the cistern take minutes to fill after it has been flushed?
- When using the Aquatech, water flows out through the overflow underneath the seat in the unit. Why does this happen?
- When the toilet is used, the toilet cover will remain upright but not the actual seat.
- When the buttons are pressed on the push button cistern, you have to keep your finger on the buttons. How can this be rectified?
- Water is leaking from between the pan and the cistern. How is the problem rectified?
- There are small scratches/marks on an acrylic bath. What can be used to get rid of the marks?
- There are rust spots on the base of a bolt on legged steel bath that are situated in any of the four corners.Is the bath faulty?
- The whirlpool function on a hydromassage bath does not work. Why is this?
- The plumber installing a cast-iron bath states that on the feet pack there isn’t a footplate that the leg attaches to.
- The diverter on the manual shower valve is stiff and cannot be moved to select different settings.
- The cycle will not start on a hydromassage bath with a self-clean function.
- The back-to-wall pan that has just been installed is leaking from the inlet joint (flush cone).
- Sometime after installation, the acrylic on the bath is moving/flexing.
- On ceramic disc brassware, the tap is constantly dripping.
- On a whirlpool bath, nothing happens when the power button on the control panel is pressed.
- On a hydromassage bath with a remote control panel, the fixed base is lit, but the remote control doesn’t work.
- On a basin with a semi-pedestal, the semi-pedestal isn’t fitting correctly to the underside profile of the basin.
- How does the semi-recessed basin template relate to the cutout of the unit?
- How can the push button cistern be made more secure when there are no drill holes in the back of it to screw it to the wall?
- Can you add a bidet cover to a bidet sometime after it has been installed?
- Aquatechs/kits must first be calibrated so they adjust to the water pressure.
- What is the configuration of the brackets and how are they fitted?
- A steel bath has developed a tiny rust spot/mark.
- A cast-iron bath has developed a tiny rust spot/mark.
